1, please make sure that the power socket
is well grounded and the earth ground is reliable.
2, please ensure that the working voltage
of the chiller is stable, normal!
As the refrigeration compressor on the
power supply voltage is more sensitive to our standard products, the normal
working voltage of 200 ~ 250V (110V models for the 100 ~ 130V). If you really
need a wider operating voltage range, can be customized.
3, the power frequency mismatch will cause
the machine to damage!
Please use 50Hz or 60Hz models according to
the actual situation.
4, to protect the circulating pump, no
water running!
The new fiber laser before emptying the storage tank water tank, make sure the water
tank after the boot, otherwise the pump easily damaged. When the tank water
level in the water level gauge (NORMAL) range, the cooling capacity of the
cooling machine will be slightly decreased, please ensure that the water level
in the water level of the green (NORMAL) range. Do not use the circulating pump
drainage!
5, please ensure that the chiller into the
wind, the wind channel smooth!
Chiller above the outlet from the obstacles
to stay more than 1250px distance, the side of the inlet from the obstacle
required distance above 500px.
6, into the outlet of the filter must be
cleaned regularly!
Must regularly wash and wash the dust
network, dust network serious blockage will cause chiller failure.
7, please note that the impact of
condensate!
When the water temperature is lower than
the ambient temperature, and the ambient humidity is large, the circulating
water pipe and the surface of the cooled device will produce condensed water.
When the above situation, it is recommended to increase the water temperature
or the cooling of the pipe and the insulation.
8, the product is industrial equipment, do
not allow non-professionals to operate.
That’s all the precautions for fiber laser cutting machine which is
from MORN. Hope that you can get a long life for your usage of fiber laser
cutting.
Article Source : http://www.morntech.com
没有评论:
发表评论