What’s the systematics of co2 laser machine?

Laser engraving machine can be divided into: non-metal laser engraving machine and metal laser engraving machine.

Non-metal engraving machine can be divided into: ordinary engraving machine (MT-960) and non-metallic marking machine (30W).

Metal engraving machine can be divided into metal marking machine (50W) and metal engraving cutting machine (MT1325).

Co2 Laser Machine Description:

With the complexity of cutting carving process to enhance the traditional manual processing and machining by equipment and technology constraints, the accuracy of the object to be processed to a certain extent, affect the quality of the product, even worse affect the economic benefits.

According to the laser energy density, operability and other characteristics, in the years of production of laser equipment based on the successful development of a new generation of high-speed XP system laser cutting engraving machine. The equipment is widely used in the processing of materials, cutting the edge of a smooth non-burr, no polishing, no noise, no dust, processing speed, high precision, low waste, high efficiency, the industry must and replacement of the best choice.

Co2 Laser Machine Features:

Imported linear guide and high-speed stepper motor and drive, cutting edge smooth, no ripple;

The use of integrated frame structure design, the machine is stable and no noise;

Easy to operate, can be arbitrary engraving sequence, processing level, to achieve partial or all one-time output of laser power, speed, focal length adjustment flexibility;

Open software interface, compatible with Autocad, Coreldraw, Wentai sculpture, Photoshop and other vector design software;

Equipped with water protection, better protection of the laser, to extend the life of the laser, optional foot switch, make your operation more simple and quick.

Exquisite design; super-strength steel, industrial grade; effective protection of the smooth operation of equipment and life; 

Dual-track operation; belt drive; can choose to configure the honeycomb / grid / flat / lift;

Patented technology: unique up and down exhaust ventilation and dust removal system; blowing protection; carving cutting materials.

Can be in the bamboo, crystal, horn, paper version, plexiglass, marble, cloth, leather, rubber, plastics and other non-metallic materials for laser engraving and cutting. Clothing, embroidery, cloth toys, furniture cloth, handbags, gloves, the leather industry in the leather industry, leather cutting and surface carving. Handicrafts, models, advertising, decoration, electrical appliances, plastic industry, acrylic panels, decorative plates and other medium-density non-metallic sheet of precision cutting.

Parameter

Laser type Carbon dioxide sealed glass lasers, water-cooled,

Effective format of 1200 × 900 mm

Cold indeed way water cooling

Engraving scanning speed 0-60000 mm / min

Cutting speed 0-30000 mm / min

Laser energy control 1-100% software setting

Minimum formed characters Chinese characters 2.0 × 2.0 mm, English 1.0 × 1.0 mm

Positioning accuracy ≤ ± 0.01 mm

Supported graphic formats DST, PLT, BMP, DXF, AI

Support software Tajima embroidery software, CORELDRAW, PHOTOSHOP, AUTOCAD, various clothing CAD software

Color separation cutting

Power supply 220V

Operating temperature 0-45 °

Operating Humidity 5-95%

Machine size / weight 1860 * 1410 * 1090 400KG

Metal engraving machine

Laser engraving machine have many years’ production experience, using the latest design concepts, equipped with advanced laser components at home and abroad, the introduction of a new generation of large format, multi-function laser processing system, simple operation, easy maintenance, production safety and protection. Which is characterized in that:

Open working platform to facilitate the processing of the material placed, and with the assembly line work to meet the large-format materials processing. At the same time, coupled with large-size cellular platform, knife platform and local lift platform to make this laser machine is not only suitable for large-scale field processing industry, such as: footwear, clothing, advertising, and meet the model industry, handicraft industry, bamboo Products industry and other small industries needs. With auto-focus, red positioning and other functions, so that this co2 laser machine is perfect, its function to the limit. Truly multi-purpose multi-purpose, time-saving and efficient. The optical part of the use of hybrid optical path, high utilization of light; optical road closed, strong security. The control system uses a unique intelligent prediction algorithm and improved control algorithm to ensure high-speed processing, smooth, efficient operation speed, laser energy real-time adjustable, greatly facilitate the operation of the customer. And has built-in 128M (up to 1G), which can store 99 files to save power to save the permanent file storage area. Again, the high-power cutting energy automatic compensation function, the cutting effect has been greatly improved. In short, this model really wide range of fabric engraving, cutting smooth no flash, automatic shut mouth, no distortion, graphics and other functions through the computer at random design.

Application Industry:

Furniture industry, packaging and printing industry, the model industry, the process of gift industry, and so on. Our products are widely used in food, beverage,

Applicable materials:

Metal sheet, acrylic, plexiglass, glass, cloth, leather, paper, bamboo products, film, canvas and so on.

Technical Parameters:

The laser power is 130W / 150W

Laser type CO2 sealed off glass tube laser, water cooled, 10.6um

Effective format 1500mm × 2500mm

Cold indeed way water cooling

Engraving scanning speed 0-60000mm / min

The maximum movement speed is 30000mm / min

Machine Instance Display

Example of machine display

Cutting speed 0-1000mm / min

Laser energy control 1-100% software setting

Minimum formed characters Chinese characters 2.0mm × 2.0mm English 1.0mm × 1.0mm

The maximum scanning accuracy of 2500DPI

Positioning accuracy ≤ ± 0.01mm

Supported graphic formats DST, PLT, BMP, DXF, AI

Support software Tajima embroidery software, CORELDRAW, PHOTOSHOP, AUTOCAD, various clothing CAD

software

Color separation cutting

Applicable materials

Wood, paper, leather, cloth, plexiglass, epoxy resin, acrylic, wool, plastic, rubber, tile, marble, crystal, jade, bamboo products and other non-metallic materials.

Article Source： http://www.morntech.com

laser tube installation for CO2 laser cutting and engraving machine

As the laser glass of CO2 laser cutting and engraving machine is fragile goods, the laser tube should be packed separately in order to ensure its safety during the transportation. So the users must install the laser tube before CO2 cutter machine installation and commissioning.
Laser tube should be mounted on the back of the CO2 engraver, open the protective cover of laser tube; you can see the two Vee-blocks.

Put the light-emitting window(low- voltage end) of laser tube with the same side of No.1 relfector mirror on the Vee-blocks carefully, and then latch on the rubber strip on the Vee-blocks wear of laser tube, fix laser tube well. 
Attention: 1) The laser tube can’t be fixed too tightly to avoid damaging it; 2) Be sure to keep the water inlet (laser tube high-voltage side) is located all the bottom of tube to keep the water filling the laser tube fully.
After fixed the laser tube, the water inlet pipe which connect with water sensor should be connected with the hight-voltage side water inlet mouth of the laser tube; the water outlet pipe should connect with the low-voltage side water outlet mouth of laser tube (if the weather is cold, in case of break the laser tube, we’ d better scald the end of the water pipe with boiled water to make it soft.), 

All the connectors must be butted firmly to prevent water leakage. The rubber pipe must be straight, can not be curled in order to avoid poor water flow.

Finally, let the high-voltage cable of the laser power supply connect to the high-voltage side post head of laser tube, the low voltage cable of laser power supply connect to low-voltage side post head of the laser tube.
For security, please seal the post head of the high voltage side and low voltage with silicon gel.

Morn has produced CO2 laser cutting and engraving machine for many years, we have professional designer and technician in this area. Our Morn team is sunny and positive, we will try our best to offer each customer the best service. If you have any question about the CNC router or laser machine you can contract us directly. We will try our best to help you.

Article Source From:

http://www.morntech.com/news/co2-laser-tube-installation.html 

Laser engraving machine used in leather and fabric processing

Laser engraving machine used in leather and fabric processing

Laser engraving process as a new processing method, its processing precision, fast, simple operation, the advantages of high degree of automation in the leather, textile and garment industry has gradually been widely used.

Laser engraving processing as a new processing method, its processing precision, fast, simple operation, the advantages of high degree of automation, in the leather, textile and garment industry has gradually been widely used. Coupled with the laser cutting machine in the apparel industry, the laser brother has for the development of the apparel industry to pay too much.

Clothing Laser Engraving Machine Embroidery

More than two-thirds of the textile fabric can use laser engraving machine to produce a variety of digital patterns. The traditional textile fabric production process requires late grinding, hot flowers, embossing and other processing, and laser engraving machine burning in this area has produced convenient, fast, flexible pattern change, clear images, three-dimensional strong, able to fully performance A variety of fabrics of the true texture, as well as long-lasting advantages such as often new. If combined with hollowing process is the finishing touch, complement each other. Clothing fabrics and clothing laser embroidery for: textile fabric finishing factory, fabric deep processing plants, garment garment factory, surface materials and processing enterprises.

Denim Image Laser Spray

Through the laser engraving machine CNC laser irradiation, vaporization denim fabric surface of the dye, which in a variety of denim fabric will not fade to produce the image pattern, gradient flower shape, such as the effect of feline scrubs, for the cowboy fashion has added a new Liang point. Laser engraving machine denim spray processing is a new, rich processing profits and market space for processing projects, very suitable for denim garment factories, washing plants, processing and other enterprises and individuals for denim products, value-added processing.

Leather and Fabric Laser Engraving Machine Standard Flowers

Laser engraving machine technology in the shoe and leather industry in the application is also very extensive. Leather laser engraving machine is the advantage of a variety of leather fabric in a variety of fast carving and hollow out patterns, and flexible operation, and will not make any deformation of the leather surface to reflect the color of the leather itself and texture. It also has the advantages of high engraving precision, no burr, no choice of shape and so on. It is suitable for the needs of processing manufacturers such as shoe upper, shoe material, leather goods, handbag, luggage and leather clothing.

Laser engraving machine refers to the laser device to connect laser engraving software, artwork input automatic engraving mode of operation. At present, laser engraving machine is the most mature laser processing technology, the most widely used technology. With this technique, any complex pattern can be engraved. Can be engraved hollow engraving and do not penetrate the blind slot carving, which carved a different shades, texture, with a layering and transition effects of various magical color patterns. With these advantages, laser engraving to meet the new trend of international garment processing.

Article Source:

Jinan MORN Technology Co.,Ltd is located in the high-tech development zone in Jinan city, north of China. Our company is the professional manufacturer and exporter of mechanical CNC router machine, laser machine and other relevant equipment.

Website: www.morntech.com